www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
RAID Rack with Port Multiplier Compatibility
Note: When configured as a set of individual drives, the Port Multiplier will
only work with a Port Multiplier aware host. Identify your host controller and
check with its hardware manufacturer if you are unsure. Addonics offers
several Port Multiplier capable host adapters.
Power Switch:
This is the switch to power devices connected to the power
supply. The power LED will light up to indicate power is supplied.
Note: The main power switch located at the back of enclosure must be
turned on first.
Reset Button:
Not operational.
Buzzer Reset:
Pressing the button stops the overheat buzzer from making
a sound. The buzzer will make a sound when temperature inside the
storage rack exceeds the temperature setting on the Thermal Managment
card.
Note: Buzzer reset switch does not silence the port multiplier buzzer.
Power LED:
Lights up when the power switch is turned on.
Temp LED:
Lights up when the temperature setting inside the storagerack
exceeds the setting on the thermal card.
Fan LED:
Normally on when fan is operational. If an abnormal condition is
detected, the LED flashes.
HDD LED:
Not operational.
