Stereo Sound & CD-ROM
4.2 Audio Applications Software Installation
The audio drivers and application software of the PC stereo sound are
included in the diskette #1 and diskette #2. Please refer to the user manual
"Audio Applications"
that comes with this package for installing the
Audio drivers and application software.
The following sections show you how to install CD-ROM device driver
software and utility software (for playing music CD using your CD-ROM
drive).
You need to go through the following sections to install the CD-ROM
software only if you are installing a new CD-ROM drive*
If you are simply connecting an existing CD-ROM drive to our sound card
with pre-installed device driver software, skip the following sections. You
should be able to use your existing CD-ROM drive after it is physically
connected to our card with the proper I/O address selected, (See Sec. 1-3)
4.3 Panasonic CD-ROM Software Drive Installation
The diskette labeled "CD-ROM Device Driver & Audio Utility", under the
subdirectory
\CDROM\PANASONi,
contains the
Panasonic CD-ROM
device driver
software and,
OPTIONALLY,
the
Microsoft MS-DOS
CD-ROM Extension file,
i.e., MSCDEX.EXE Another subdirectory
MKEAUDIO
contains the
MKE audio utilities
in order for you to use
the CD-ROM drive as an audio CD player. Please follow steps below to
install the driver & utilities:
NOTE:
The file MSCDEX.EXE is not furnished unless the card is bundled with a
CD-ROM drive supplied by us. Installing CD-ROM software using
CDINSTL.EXE will fail without this file. You may obtain this file from
your CD-ROM drive supplier, or, if you have DOS version 6.0 or up,
obtain the file from the operating system. Once you secure the
MSCDEX.EXE, you may copy this file to the subdirectory
\CDROM\PANASONI, and then follow instructions manually or using
install the CD-ROM software.
Page -11
