Stereo Sound & CD-ROM
CDMKE.SYS & MSCDEX.EXE from the subdirectory
\CDROM\PANASONI 011 the floppy diskette to the sub-
directory CDROM just created on your boot hard disk.
If you are installing the CD-ROM drive in a networked
system, please consult your system manager or system setup
for proper drive specifications in Step 1 to Step 3,
4.3.2 MKE Audio Utility Installation
To install the audio utility, you may insert the diskette to the drive
that you selected. Then change to A or B drive, where the floppy
diskette is in, by entering the following command at the system
prompt:
O C:\>A: [Enter]
O A:\>cd \MKEAUDIO [Enter]
You will be prompted to select the target drive and subdirectory to
which the audio utility software will be copy to.
Afterwards, you will be asked to select a software interrupt for the
audio utility program. You may use the default (60H), or select any
other on the list. Just make sure that the software interrupt selected
does not conflict with any other interrupt used by other software
programs.
Upon successful completion of the installation, you should find
MKECDAPL.EXE, CDPLAY.BAT, ESSVOL.EXE under the
subdirectory that you selected or created on your hard disk. To use
your CD-ROM drive as a regular audio CD player, simple execute
CDPLAY by entering:
or
O C:\>B:
O B:\>cd \MKEAUDIO
[Enter]
[Enter]
Then, assuming A drive is used, do the following:
O A:\MKEAUD10>1NSTALL [Enter]
O C:\CDROM>CDPLAY
[Enter]
Page -15
