Stereo Sound & CD-ROM
Upon successful completion of the installation, you should find
CDPALY.BAT, ESSVOL.EXE, SONYCD.EXE, EJECT.COM, LOCK.COM, and
UNLOCK.COM
under the subdirectory that you selected or created on
your hard disk. This driver enables you to use your CD-ROM drive as
a regular audio CD player.
EJECT.COM allows you to eject the CD
tray from the CD-ROM drive. LOCK.COM will lock your tray even if
you push the eject bottom on the CD-ROM front panel. Run
UNLOCK.COM to re-release the tray.
4.5MITSUMI CD-ROM Software
The diskette labeled "CD-ROM Device Driver & Audio Utility", under the
subdirectory
\CDROM\MITSUMI,
contains the
Mitsumi CD-ROM
device driver
software and,
OPTIONALLY,
the
Microsoft MS-DOS
CD-ROM Extension file,
i.e., MSCDEX.EXE, Another subdirectory
MTMUTIL
contains the
Mitsumi audio utilities
in order for you to use
the CD-ROM drive as an audio CD player. Please follow steps below to
install the driver & utilities:
NOTE:
The file MSCDEX.EXE is not furnished unless the card is bundled
with a CD-ROM drive supplied by us. Automatic CD-ROM software
installation by running SETUP.EXE will fail without this file. You
may obtain this file from your CD-ROM drive supplier, or, if you
have DOS version 6.0 or up, obtain the file from the operating
system. Once you secure the MSCDEX.EXE, you may copy this file
to the subdirectory \CDROM\MITSUMI, and then follow instructions
to automatically or manually install the CD-ROM software.
4.5.1 CD-ROM Device Driver Installation
Put the diskette into your floppy drive, change driver to drive A or B.
At the system prompt, change the directory by entering:
A:\>cd \CDROM\MITSUMI [Enter]
or
B:\>cd \CDROM\MITSUMI [Enter]
depending on which drive you use. An installation routine
SETUP.EXE has been provided to assist you installing the software,
Assuming you are in A, enter:
Page - 20
