SABRE
™
RANGER 5000 User Guide
© 2017 Addvalue Innovation Pte Ltd. All rights reserved.
54
11.3.4.10 Web
For security purpose, user can change the port of the Web Console.
Navigate to
Menu > Settings > Terminal Settings> Web
to change the internet browsing port.
By default, the port is 80.
i. Enter the new port number. It can be any number from 1 to 65535.
ii. Click
Update
for the setting to take effect.
iii. Navigate to
Menu > Settings > Terminal Settings> Reboot Terminal
and click “Reboot
terminal” to reboot the terminal for the new settings to take effect.
NOTE:
After set the port number (e.g. 20),
http://192.168.1.35:20
is the address to login the Web
Console.
Figure 66
11.3.4.11 Antenna Pointing Buzzer
Navigate to
Menu > Settings > Terminal Settings> Antenna Pointing Buzzer
to enable Audio
Assisted Pointing Mode. By default, the antenna pointing buzzer is disabled.
i. Select
Enabled
to enable the antenna pointing buzzer.
ii. Click
Update
for the setting to take effect.
Figure 67
