Thank you for your decision to purchase this high quality product of ADE Germany. You
bought a scale featuring highest technical standard and well-proven quality. Please read
this instruction manual prior to the start-up and keep it careful to have this information on
hand whenever needed.
1.
Preparation for use
Activate / Replace batteries:
To replace battery open the battery cover and move the battery at the recess
downwards and the battery will be easy to take out. Make sure that you do not bend the
contact. Insert the new battery (1 x CR 2032) and close the battery cover.
Safety guidelines:
Please care that no heavy object may fall on the scale.
Otherwise, the scale may become damage.
Clean the scale only by using a slightly damp cloth. Do not use
solvents or abrasive cleaning agents. Do not submerge the
scale under water. All plastic parts of the scale should been
cleaned immediately after contact with fat, spices, vinegar and
other heavily spiced or coloured food. Avoid contact with citric
acid.
2. Handling
Switch-on the scale:
As long as the scale is in off-mode, the display indicates the room temperature. To
switch-on the scale push the ON/OFF-button. At first, the LCD display will show all
characters for a few seconds. After the scale levelled-off, the indication will be “0 g“ /
“0.0 oz“ / “0: 0.0 lb oz“ or “0 ml” according to the setting. Now the scale is ready to use.
Units of weight:
By pushing the UNIT-button it is possible to change the unit of weight for country
specific setting (g = gram / oz = ounce / lb oz = pound ounce / ml = millilitre). Please pay
attention to use the scale under consideration of your country specific unit of weight.
Tare-func tion:
Use the ON/OFF-button to set the scale to “0 g”. Place for example a bowl on the
weighing platform. Upon the weight is indicated push the ON/OFF-button to set the
indication again to zero. This process is repeatable until the max. capacity of the scale (5
kg) has been reached. After removal of the loading, the display indicates the total weight
as negative reading.
Automatic - / manua l switch-off the scale:
If the indicated weight does not change within approx. two minutes, the scale will
automatically switch-off. To save the battery you can switch-off the scale manually by
pushing the ON/OFF-button for about 2 seconds. When the scale is in off-mode, the
display indicates the room temperature
3. Error Messages
“Lo“
=
Battery is used up - Please replace the battery with the intended
type (1 x CR 2032).
“EEEE“
=
Overload - The weight exceeds the maximum capacity of the scale
(5 kg). Please immediately remove the critical load to avoid load
cell damage.
4. Technical Data
Capacity x graduation: max. 5 kg x 1 g
Dimensions:
117 mm x 117 mm x 22 mm
Batteries:
1 x CR 2032 (included)
Subject to technical modifications
5.
Warranty
ADE warrants for a period of
2
years from the date of purchase that it will
remedy any defects due to faulty material or workmanship free of charge by
repair or replacement. When purchasing, please have the warranty coupon signed
and stamped by the dealer. When making a guarantee claim, please return the
scale together with the guarantee card including the reason of complaint to your
dealer.
CE Declaration of Conformity
This device features radio interference suppression
in compliance with valid EC Regulation 2004/108
Note: The displayed value may be adversely affected under extreme electromagnetic
influences, e.g. when using a radio unit in the immediate vicinity of the device. Once the
2
3
Open the battery cover at the bottom side of the scale and
remove the battery safety strip. Please ensure the correct
polarity of the battery (+/-).
