42
DCF Radio-controlled alarm clock CK 1701
Checklist when data is missing in the display
1.
Check whether the location of the radio-controlled alarm
clock is suitable, see “Choosing a location”.
2.
Manually restart the receiving process, see “Starting signal
reception manually”.
3.
Wait until the alarm clock automatically switches back to
reception at a later time.
4.
Manually perform settings if reception is not possible at
the location, see “Setting the time and date manually”.
Setting the time manually
If there is more than approx. 60 seconds between two
pushes of a button, the setting process automatically
ends and you will have to repeat it.
1. Slide the SET switch to SET TIME.
2. Press the SET button. “00” flashes in the display for the time
zone you are in (“00” is the default setting for the European
mainland).
Summary of Contents for CK 1701
Page 158: ......
