HW945-210409-Rev006-UM-en
4
Positioning of the scale
Make sure all four feet of the platform have direct contact to the surface.
The spirit level of the scale is an additional tool to make sure the scale is carefully positioned
and offers best results when the air bubble is centred.
The alignment of the scale must be checked and corrected every time the location of the scale
is changed.
Attached counternuts can be used for the foot screws. To reach a higher standing of the scale
use the nuts. Release the foot screws from the housing, fix the counternuts to the winding of
the foot screws and rescrew them to the housing.
The scale has a transport lock.
Underneath the weighing platform you fond the following remark:
Please remove this
Protection Screw before using!
Carefully keep the protection screw for future use (transportation e.g. for repair).
Place the metal weighing tray on the platform by placing the 4 pins in the appropriate holes.
Connect the mains adapter to the scale.
Quality check
ADE products correspond to the applicable EC Directives and European standards to
manufacture and distribute world-wide weighing and measuring equipment as per the latest
technical standard offering a long lifetime and continuous reliability.
