HW945-210409-Rev006-UM-en
6
Setting the unit counting mode
Attention: If containers are used, please proceed as explained under
Tare function
.
Once in weighing mode put a reference batch (10, 20, 30 counting parts) on the
platform or container (minimum 1%o of the full capacity) .
Press MODE key
Pcs is indicated and the display shows the reference batch 10.
If the result shown varies from the reference batch press either
zero
or
tare
key.
Press
mode
key subject to pieces put on the platform and reference badge are
identical. You may now start counting process.
Take the object from the platform and press
mode
key again to return to weighing
mode.
Alarm functions
Overload
An overload of the scale is announced by a beeping acoustic signal as well as by EEEEE
appearing overloading objects from the platform. in the display. To avoid any damage of the
scale release overloading objects from the platform.
Underload signal
If the platform cover is removed the beeping acoustic signal is to be heard. The display shows
AdL.
Battery alarm
The scale is equipped by a rechargeable battery. In case the voltage is too low this is indicated
on the display. A 12 hrs loading by using the mains adapter is necessary. The battery symbol
flashes if loading is necessary. A full loading process takes about 12 hours.
CHARGE indication is illuminated (yellow) . Please make sure the scale is in off mode for full
loading.
An extreme unloading of the accumulator must be avoided absolutely.
Cleaning & Maintenance
Cleaning
Before cleaning make sure the scale has been disconnected from the socket. For cleaning just
use a damp cloth or common disinfection products. Do not use any aggressive cleaning fluids.
Make sure no water or cleaning fluid penetrates the scale.
