Seite
28
von
112
M118000-01-210305-Rev002-UM-en
Getting started with the scale
Carefully unpack the scale and remove all packaging materials.
Turn the scale over and insert four 1.5 V AA batteries supplied into the battery compartment. When
inserting the batteries, make sure the polarity is correct (as shown in the battery compartment).
For mains operation, connect the optional mains adapter to the mains connection. Insert the cable
into the cable guides.
A cable not inserted in the cable guides can lead to a force shunt and thus to
incorrect measured values.
After warm-up time (15 minutes) the scale is ready for operation.
Place the scale on a level, stable surface. Align the scale using the levelling feet. Make sure that
the air bubble of the spirit level is centred in the black frame.
Check the horizontal position of the scale after every
change of location!
How it works
6.1
Determination of Weight
The mechanical forces acting on the scales are transformed into measurable and evaluable
electrical signals by load cells. The weighing result is displayed continuously.
6.2
Determination of Length
The physical change of the length measuring device causes a change in impedance and is thus
converted into measurable and evaluable electrical signals. By linking the two calipers, it is
irrelevant at which position they are located. The result of the length measurement is displayed
continuously.
Using the scale
7.1
Starting the scale
To switch on the scale, briefly press the ON/OFF key.
After a brief functional test, the scale shows "0.00 kg" and the symbol >0<.
The scale is now ready for use.
The scale starts automatically with the last function used.
7.2
Switching off the scale
7.2.1 Automatic switch off
The scale switches off automatically after approx. 90 seconds in battery operation and after approx.
7 minutes in mains operation.
Summary of Contents for M118000
Page 2: ......
