6
M703600-01-210817-Rev008-UM-en
Zero
Press
for 1 second to zero
scale.
“ZERO” shows and weight turns
zero.
If weight is tared, or not stable, or held, zero is not
allowed.
If weight is over the Manual-Zero range, zero is not
allowed.
Settings
Press
and
simultaneously, and hold the two
buttons for 1 second, to enter Setting Mode.
Press
To enter Auto-Off option; and press
to change Auto-Off option.
Auto-Off can be set to 0 (disabled), 5 (5min), 15
(15min), 30 (30min), 60 (60min).
Press
to
enter
Auto-Zero
option;
and
press
to change Auto-Zero option.
Auto-Zero can be set to 0 (disabled), by 2 (2% of full
cap.), 4 (4%of full cap.), 10 (10% of full cap.), 20
(20%of full cap.), 50 (50% of full cap.)
Press
to manually enter Zero option; and
press
to change Manually entered-zero option.
Manual-Zero can also be set to 0 (disabled), 2 (2%of
full cap.), 4 (4%of full cap.), 10 (10%of full cap.), 20
(20%of full cap.), 50 (50% of full cap.).
Press
to enter backlight option; and press
to
change backlight option.
Backlight can be set to off (disabled), 5 (5sec), 15
(15sec), 30 (30sec), 60 (60sec), on (never).
Once backlight is set to 5, 15, 30, or 60, ff it turns off
corresponding to the seconds after stability has been
reached.
When Backlight is set to off, it is completely disabled.
