80
WS 1911 weather station
End alarm clock
−
Press any button on the base station (except
)
to stop the alarm. After 24 hours, the alarm will be
triggered again.
Auto stop function
If you do not press a button, the alarm switches off
automatically after 2 minutes. After 24 hours, the alarm will
be triggered again.
Repeat alarm (snooze function)
−
Press the
button once when the alarm signal
sounds.
The alarm signal stops according to the setting made
(default setting: 5 minutes). Then the device switches
back on and the alarm sounds again. This procedure
can be repeated multiple times.
−
To exit snooze mode, press any button
(except
) or hold down
for more
than 2 seconds.
Use projection
The projection only works if the room is sufficiently darkened.
1. Aim the projector at a wall or ceiling. Recommended
distance: 1 to 3 metres.
2. Slide the
Projection
switch to
ON
.
3. If necessary, press the button if the projection on
the wall or ceiling is inverted.
