www.adeept.com
56
5.Combinations of the robotic arm.
Assemble method (except the front part of the robotic arm).
In 90 degrees when powered on.
Two combinations of the robotic arm.
Disassembly and switching method of the two combinations.
Before starting to exert the function, we need to test whether there are problems with the
assembly of the robotic arm. In the matching code, 00 is the code for testing the robotic arm to
adjust to 90 degrees when powered on. You can open the code and download it to the Arduino
for testing (it may not be able to achieve the effect shown in the picture when powered on, a
little error is allowed to exist)
Summary of Contents for ADA031
