www.adeept.com
19
3.AssembletheRoboticArm
3.1 Preparations beforeAssembly
Connect the WS2812 LED Module
Please note that the end marked with white strip is the signal input, and the end without white
strip is the signal output.
Connect Rotary Encoder
(Connect the encoder with the larger end of 5 Pin wire)
The end marked with white strip is the
signal input
The connection between two
WS2812 LED Module
Summary of Contents for RaspArm
