That's it, the connection to the Raspberry Pi is complete.
Download the robot program
Setting up the robot program step by step and installing it will take a lot of time
and effort. In the software package, we provide an installation package to install
and automatically perform related settings.
First, download the product project (software package) in the Raspberry Pi terminal.
Enter the following command
(Note that all lowercase input must be used):
sudo git clone
adeept_raspclaws.git
Then install
(note that python3 command must be used, the same below):
sudo python3 adeept_raspclaws/setup.py
This process may take several hours, please wait patiently for the installation to
finish, the Raspberry Pi will automatically restart, and MobaXterm will be
disconnected. If the program is installed correctly, server.py under the package will
run automatically.
Most problems after installation are caused by server.py not
being run automatically.
If server.py does not run automatically for some reasons,
you can run it manually by typing:
sudo python3 adeept_raspclaws/server/server.py
Note: Do not run multiple server.py, if you do (or run a new one without noticing
that there is already an automatically running server.py), use the following