2-Way Voice Operation (cont’d)
– 10 –
Key
Entry
Function
7
Re-initializes 90-second voice session timeout. The system
automatically ends the voice session 90 seconds after it started unless
the “7” command (or one of the other commands) is entered to re-
initialize the timeout.
0
Switches from presently active mode to Listen mode with all installed
inside stations enabled and with low volume selected.
#
Used to clear an initially incorrect key press when multiple commands
such as “99” or “
✶
8n” are being entered so that a corrected command
can be entered. Also used to clear any incorrect access code digits that
were entered so that a correct code can be entered.
99
Ends 2-way voice session.
NOTE: Pressing the “END” key on any station can also end voice
session.
✶
8n
Selects station number “n” where “n” ranges from 1 to 7. When pressed,
the system deactivates all but the selected inside or outside station
while maintaining the previously selected Talk, Listen, or VOX mode.
NOTE: The system will go to the selected station even if this station is
an outside station or if this station is not installed (nothing will be heard
in Listen or VOX mode). You can use the “0” command to select Listen
mode with all inside stations enabled.
