Alarm Annunciation, Voice Status Messages and
Music Broadcast
– 16 –
Alarm Annunciation
If this feature is programmed, inside stations will annunciate a
steady, dual-tone sound or a pulsing sound when the premises alarm
system has detected a burglary alarm or fire alarm condition,
respectively. You can silence these sounds, along with sounds
annunciated by the alarm system’s keypads and sirens, by entering
the appropriate command at the alarm system’s keypad. The keys on
the station will not silence the sounder or disarm the system.
Voice Status Messages
If this feature is installed, inside stations will annunciate voice
messages when the premises alarm system has been armed or
disarmed or has detected an alarm condition. You can arm and
disarm the alarm system, and silence alarm messages, by entering
the appropriate commands at the alarm system’s keypads. The keys
on the station do not have any effect on this feature.
Music Broadcast
If this feature is installed, inside stations will broadcast music while
the intercom is idle.