2-Way Voice Operation (cont’d)
– 8 –
Starting Voice Session
Start a voice session as follows:
Step Action
1
Call the premises from a key-type TouchTone (multi-frequency)
telephone.
If… then…
there IS an answering machine on the
premises
wait for it to pick up the
call and complete its
greeting message.
2
there is NO answering machine on
premises
the system will pick up
the call after the 6
th
ring
and issue a continuous
command prompt beep.
Enter your 6-digit user access code.
If…
then…
the system detects a valid access code
the system will go off-
hook (if an answering
machine picked up the
call) and then will start the
session in low-volume
Listen mode.
3
one of the following conditions is met:
•
you do not press a key within 10
seconds
•
you press keys but the system does
not detect a valid code within 20
seconds
•
you make 3 unsuccessful attempts to
enter the access code
the system will stop
listening for the access
code and will hangup if it
has picked up the call.