–
11
–
2nd Page Fields
1*26
PANIC BUTTON OR SPEEDKEY
[00, 00, 00, 00]
|
|
|
|
A B C D
Enter speedkey macro # (01-35) to use keys A-C for macro.
Otherwise enter 00 to use as panic. For D key, enter macro
# or 00 to select macro when key is pressed.
1*43
PERM. KEYPAD BACKLIGHT
[0]
1=enable; 0=disable When disabled, display lights when
any key is pressed, and turns off after period of keypad
inactivity.
1*45
EXIT DELAY SOUNDING
[0]
1=enable; 0=disable Produces quick beeping during exit
delay if enabled.
1*47
CHIME ON BELL 1
[0]
1=enable; 0=disable
1*52
SEND CANCEL IF ALARM + OFF
[0]
1=no restriction; 0=within Bell Timeout period only
1*76
ACCESS CONTROL RELAY FOR PART.[00]
|
Relay will be pulsed for 2 seconds whenever code + [0] is
pressed. Enter 00-96; 00=none. Must be "00" for
Commercial Fire & UL.
3rd Page Fields
2*05
AUTO-ARM DELAY
[15]
|
Enter the time between the end of the arming window and
the start of auto-arming warning period, in values of 1-14
times 4 minutes 00=instant; [15=no auto arm at all]. When
this delay expires, the Auto-Arm Warning Period begins.
2*06
AUTO-ARM WARNING PERIOD
[15]
|
This is the time during which the user is warned to exit the
premises prior to the auto-arming of the system (beeps
every 15 seconds; "ALERT" displayed). Enter 01-15
minutes. 00=instant at end of arming delay .
2*07
AUTO-DISARM DELAY
[15]
|
This is the time between the end of the disarming window
and the start of auto-disarming. Enter 01-14 times 4
minutes; 00=instant at end of window; 15=no auto-disarm.
2*08
ENABLE FORCE ARM FOR AUTO-ARM
[0]
0=disable; 1=enable.
2*09
OPEN/CLOSE REPORTS BY EXCEPTION [0]
1=enable; 0=disable; If enabled, only openings and closings
occurring outside the scheduled opening/closing windows
will trigger dialer reports. Opening reports will also be
suppressed during the closing window, in order to prevent
false reports when the user arms the system and then
reenters the premises to retrieve a forgotten item.
2*10
ALLOW DISARMING ONLY DURING
[0]
ARMING/DISARMING WINDOWS
See system-wide field 2*11 if enabling field 2*10. This
feature adds high security to the installetion.
0=disable; 1=enable
2*18
ENABLE GOTO FOR THIS PARTITION
[0]
1=Allow log-on from other partitions; 0=disable
2*20
ENABLE J2 TRIGGERS by PARTITION
[1]
0=disable for displayed partition; 1=enable for displayed
partition
2*22
DISPLAY FIRE ALARMS OF
[0]
OTHER PARTITIONS
0=No; 1=Yes
2*23
DISPLAY BURG/PANIC ALARMS OF
[0]
OTHER PARTITIONS
10=No; 1=Yes
2*24
DISPLAY TROUBLES OF OTHER
[0]
PARTITIONS
0=No; 1=Yes
4th Page Fields
3*57
BELL 2 & AUX. RELAY CONFIRM
ARM. DING
1=enable; [0=disable]
Bell 2 Relay
Must be "1" for UL.
3*59
ENABLE BELL 2 & AUX. RELAY
CHIME ANNUNCIATION
1=enable; [0=disable] Bell 2 Relay
3*60
BELL 2 & AUX. RELAY TIMEOUT
| |
00-15 times 2 minutes; 00=no timeout [00,00]
Bell 2
Relay
Minimum 16 min. for UL Burglary installations.
SUMMARY OF PROGRAMMING COMMANDS
•
To enter program mode, enter installer code + [8] + [0] +
[0]
•
To set standard defaults, press *97
•
To change to next page of program fields, press *94
•
To return to previous set of fields, press *99
•
To erase account & phone number field entries, press
[*] + field [*]
•
To assign zone descriptors, press #93 + follow menu
prompts
•
To add custom words, press #93 + follow menu
prompts
•
To enter Installer's Message, press #93 + follow menu
prompts
•
To exit program mode, press *99 OR *98: *99 allows re-
access to programming mode by installer code. *98
prevents re-access to programming mode by installer
code.
www.PDF-Zoo.com
