•
Before using the product, make sure the two hands controls function!
•
Before starting work, inspect the hydraulic connections:no damages, no leakage and
etc affect the normal operation.
•
Make sure a suitable working area free from obstructions e.g. logs, split wood ect
•
Make sure stopping the machine completely and unplugging before cleaning or
adjustment!
•
Never leaving the machine unattended when running!
•
NEVER reaching into the splitting zone, crush hazards!
WARNING! NEVER using elbow to operate the lever! NEVER using any parts of body except hand to
operate the lever. ALWAYS using TWO hands to operate the lever!
2.2 .APPLICATION CONDITIONS
This log splitter is designed for operating under ambient temperatures
b5
℃
and 40
℃
and for installation at altitudes no more than
1000m above M.S.L. The surrounding humidity should less than
50
%
at 40
℃
and -90% at 20
℃
.It can be stored or transported under ambient temperatures
between -25
℃
and 55
℃
.
52.3Never dismantle and reassemble the log splitter by yourself unless
you are a professional engineer. Otherwise, the self-assembling may
lead to some dangers as below:
(1)Oil leak (3)motor & pump damage
(2)No pressure (4)pressure is too big for cylinder endurance etc.
3. Operating instructions
Place it on a stable.flat and level work surface and fix the log splitter at the base plate by the two holes
3.2 Electrical specs
With 230 Volt/50Hz motor, the log splitter should be connected to
standard 230V
±
10%/50Hz
±
1%.
Connect the 230V AC motor using a power cable in a minimum
section of 1.5mm
2
（
3X1.5
）
.Power feeding is performed
via a control switch electrically connected between a power source(plug)
and the drive motor.
Unplug and stop he machine by disconnecting it from power source when not in use, before
making adjustments, changing parts, cleaning, or working on the log splitter;
Consult technical manual
before servicing.
Motor working duty:
The working duty is S 6 40%:
It means :continuous operation periodic duty:
time of one load cycle is 10
minutes,
operation time at constant load is 4 minutes, operation time at no-load is 6 minutes.
Summary of Contents for VLS8TS-1
Page 17: ......
