57
ADEO Services - 135 Rue Sadi Carnot - CS 00001 - 59790 RONCHIN - FRANCE
•
CE
VI. TECHNICAL DATA
VII. PRECAUTION
•
The awning must be installed in places where it cannot be impacted.
•
The support must be adequ ate for the weight of the blind.
•
It must be protected against splashing water and damp places.
•
Provide enough space around the awning to avoid any risk of blockage or mechanical stress.
•
Make sure you can connect your awning to the cable when the USB connection cable is
connected to the motor.
VIII. MAINTENANCE
•
Disconnect the electric blind from its power supply before doing any maintenance on the
electrical parts.
•
Do not use abrasive or aggressive cleaners, always unplug the connecting cable when cle-
aning the awning. Do not spray liquid on the motor or charger.
•
Clean the remote control with a soft cloth.
PARTS
VALUES / SYMBOLS
Tube diameter
25 mm
Motor model
DM25LEU/S-1.1/28
Motor voltage
DC 5V
Charge voltage
DC 5V
Maximum amperage charger
2A
Power
8W
Torque
1.1 Nm
Speed
28 RPM
Amperage
0.94 A
Moisture and dust protection
IP20
Motor temperature range (heavy use)
-0°C to + 40°C
Motor temperature range (normal use)
-0°C to + 40°C
Sound pressure level
≤ 46 dB
Remote control DD2700H
3V battery CRV2450
Transmitting frequency
433.925 MHZ
Transmitting power
10 Millwatt
Operating temperature remote
-5°C to + 50°C
Transmission distance outside
200 m
Transmission distance inside
35 m (between two wall)
Charger
100-240V~ / 5Vdc
Electric insulation Class II Double insulation
Electric insulation Class III Very Low voltage
CE Declaration
Symbol for recycling for the battery
Symbol for recycling for the electrical & electronic product &
parts WEEE
Symbol for recycling for packaging
Summary of Contents for 3276007287851
Page 62: ......
