8
Begin unrolling the Foil Heating Mat evenly across the floor outside the areas that you marked
previously. When you reach the next wall, cut the mesh, turn the mat, and begin rolling in the
desired direction.
Ensure that the Foil Heating Mat is in full contact with the insulation board at all times. Avoid
walking on the heating mat. If this is not possible,
use shoes with soft soles.
It is highly recommend taking photographs of
the installed Foil Heating Mat before installing
the flooring.
NEVER CUT THE HEATING CABLE!
Step 8: STICK THE CONNECTING TAPE.
In order to protect the mat from damage, we need some necessary protective measures. A roll of
Aluminum tape and Aluminum foil glass fiber tape is necessary. Firstly, we cut about 10 cm long
aluminum foil tape, as shown in figure ,Stick the aluminum foil tape connection cut open the net
effect is to form an integral part of the earth. About stick tape half a meter at a time. Secondly,
along the direction of the aluminum foil mesh stick the aluminum foil glass fiber tape. Pay
attention to keep flatness, stick outside too. The role is to protect hot line damaged in the
installation process.
