PREPARE PARTS BY INSERTING DOWELS
1
A=
2
4
8 x 30
mm
Dowel
Prepare the parts for assembly by inserting dowels (part A) into the pre-drilled dowel holes in the following parts:
•
Insert
2
dowels (part A) into the top of each side panel; 1 right
facing
side panel (part 02) and 1 left
facing
side panel (part 03).
•
Insert
2
dowels (part A) into each side of the shelf (part 0
7
).
•
Insert 2 dowels (part A) into the front of each drawer side; 1 right
facing
drawer side (part 10) and 1 left
facing
drawer side
(part 11).
•
Insert 2 dowels (part A) into both ends of each crossbar; 2 drawer crossbars (part 04) and 1 bottom crossbar (part 05).
A
A
A
A
11
0
7
0
3
0
2
0
5
0
4
10
A
A
A
A
A
A
A
A
A
A
A
A
AA
A A
A
2
O
O
=04
Foot
ATTACH
THE
FEET TO
THE
LEGS
NOTE: The pre-drilled pocket holes are at the top of the side panels. The feet go on the opposite end.
Attach the 4 feet (part
O
) to the 4 legs
attached to both of the side panels (parts 02 & 03)
by screwing the foot
(part
O
) into the bottom of each leg clockwise just until tight. Do not try to force or over-tighten the feet as this
could cause the wood to split.
5
1
NOTICE:
7+(:5,77(1
,16758&7,216
CONTAINED
+(5(,1$5(
&23<5,*+7('
0
2
0
3
PRE-DRILLED POCKET HOLES
(TOP OF PANELS).
