Adesso NUSCAN 3200 series, User Manual

 
12.

Programming Guide 

If you need to make changes in the configuration of the scanner for specific 

applications, a full Programming Guide can be downloaded at: 

http://www.adesso.com/productmanuals/UserGuide_NuScan3200.pdf

13.

Trouble Shooting  

a. Problem:  Nothing happens when you follow the operating instructions. 

Possible Cause 

Possible Solution 

Interface cables are 
loose. 

Check for loose cable connections. 

b. Problem: Light comes on, but symbol does not decode. 

Possible Cause 

Possible Solution 

Scanner is not 
programmed for the 

correct bar-code 

type. 

Please refer User’s Guide and be sure to select the 
correct interface selection and ensure that the 

scanner is programmed to read the type of barcode 

you are scanning. 

Barcode symbol is 

unreadable. 

Check the symbol to make sure it is not de-faced.  Try 

scanning test symbols of the same barcode type. 

Distance between 

scanner and barcode 

is incorrect. 

Move the scanner closer to or further from the 

barcode. 

c. Problem: Symbol is decoded, but not transmitted to the host. 

Possible Cause 

Possible Solution 

Scanner is not 

programmed for the 

correct host type. 

Please make sure the scanner is configured to the 

appropriate host type by scanning the corresponding 

programming barcode on the User’s Guide. 

11