04-09-V3-ptr
4
The ARF6513E receivers are fixed by the fixing lugs onto the top (antenna) and bottom (stuffing
box) parts of the housing. Any operation (drilling…) performed on the housing makes it lose its
IP65 tightness rating.
Remove the two stainless steel screws (A and B) and take the bottom part off to access the power
supply terminal blocks and contacts.
Remove the screws from the
part with stuffing box (A)
(B)
•
Power supply
Turn off the power supply, then wire the power supply to the screw terminals and -.
RX
DC voltage supply
Maximum 24 V
BAUD
+V
0V
CTS RTS RXD TXD
CTRL
Power supply
7V < +V < 24V
•
Display
The ARF6513E receiver is equipped with a green LED, that is lit when decoding is valid.
PRODUCT INSTALLATION
