User Guide | COMFORT LwM2M | NB-IoT / LTE-Cat-M1
46
Mount on a wall at a height of 1.5 meters from the floor, in an unobstructed area and not
exceeding 2 meters.
Place on a furniture piece at 1 meter from the floor.
The product should be installed using 2 CBLZ 2.2 x 19mm screws and 2 SX4 anchors. Use these
products or equivalent ones to secure your product to a flat surface.
7.2. Product Installation Recommendations
To obtain accurate air quality measurements, we recommend following the instructions below:
Do not use the sensor for outdoor purposes.
Avoid positioning the sensor directly facing the sun or near a heat source, cold source, ventilation,
or in an airflow.
Maintain a minimum distance of one meter from doors or windows.
When installed on furniture, avoid placing it in direct proximity to an individual.
Do not install the sensor too close to the ground, less than 30 cm.
Do not install the sensor in a dusty or poorly maintained area (garage, basement, workshop, etc.).
Do not install the sensor in areas with regularly exceeding 95% relative humidity (bathrooms,
changing rooms, spas, laundry rooms, etc.).
Do not install the sensor in an area where it can be damaged or torn.
CAUTION
The top face of the product (allowing access to the enclosure) should be accessible with a
screwdriver. Do not position it against a ceiling or under an object, as this may prevent opening the
enclosure.
