2. Place the item stably, then connect the power, just base on the requirement to adjust the temperature
to the fitting one, now yellow light is turn on, heating tube start to work.
3. When the temperature reach the setting one, then the item start to keep warm.
4. To avoid the metal tong damage the item, please use the wood or bamboo tong to take out the food.
5. When the temperature reaches the setting one, thermostat will shut down the power, yellow light will
turn off,heating tube will stop working. When the temperature comes down, the thermostat will start
working again automatically, yellow light turns o, and the heating tube also starts to work again. This
process is cycling repeatedly, guarantee the temperature is on the set up scope.
Ⅶ.
Notes:
To avoid scald, please don
’
t touch the heating plate when it is working.
●
Inject the water before turn on the switch
●
When the item is stopped working please take out the plug or cut off the power.
●
Forbidden to put the flammable material in the item.
Ⅷ.
Maintenance and Maintain:
1. Please use a wet cloth to clean, or use neutral vinegar to clean if necessary, do not rinse the machine
with water directly to avoid the fire ware and electric control parts damage.
2. If the item appear trouble, do not dismount the machine, and send it to our company
’
s authorized
service department or distributor for repair.
3. Make sure the power is turned off when all the maintenance are in process.
4. Do not rinse the machine with water directly to avoid the fire ware and electric control parts damage.
5. If long time no use, it should be cleaned up and keep it in ventilate and non-fret environment.
Ⅸ
.Explode View：
Summary of Contents for HBW-1P
Page 7: ......
