Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
GSM I/O and Alarms Modem
Document code: MN67302_ENG Revision 1.001 Page 20 of 35
DATE & TIME SETTING:
By pressing the “
Date & Time Setting
” button it is possible to change the Date & Time of the device and create the Profiles.
The Profiles are used for limiting the time of the operations that the users, that have assigned a Profile, can perform.
Profile 0 is used for give to an user the possibility to make the operations all the time in a day.
D
ATE
&
T
IME
In this section it is possible to change the Date & Time of the
device.
There are two possibilities:
Insert an own Date & Time, by compiling the fields
“
hh
”, ”
mm
”, ”
ss
”, ”
dd
”, ”
mm
”, ”
yy
”; and then
pressing the button “
Set Custom Date & Time
”;
Insert the PC date & Time, by pressing the button
“
Set
PC Date & Time
”.
It is possible also read the Date & Time of the device and
also the Firmware Version by pressing the “
Read Status
Device
” button.
For doing these operations it is necessary to connect the
device through the USB to the PC and select the COM port.
The device must be at Normal Mode.
For the year (yy) you have to insert only the last two
digits.
Figure 12: “Date & Time Setting
Date & Time” window
