Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
EtherNet/IP / DeviceNet Master - Converter
Document code: MN67597_ENG Revision 1.011 Pagina 15 di 25
DEFINE BYTE:
By pressing the “
Define Byte
” button from the main window for SW67597 (Fig. 2) the window “Define Offset” appears (Fig. 5).
In the field “Select the Slave DeviceNet” it is possible to select the slave to configure between those defined in the “DeviceNet Network”
step.
The data of the column have the following meanings:
Byte IN side:
In the column “
Offset
” it is possible to select
the desired byte of DeviceNet which will be
written from the EtherNet/IP Master;
In the column “
Mnemonic
” is possible to
insert a description. It isn’t necessary
compiling this field, is only a label.
Byte OUT side:
In the column “
Offset
” it is possible to select
the desired byte of DeviceNet which will be
read from the EtherNet/IP Master;
In the column “
Mnemonic
” is possible to
insert a description. It isn’t necessary
compiling this field, is only a label.
Figure 5: “Define Offset” window
