Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
BACnet Master / KNX
Document code: MN67801_ENG Revision 1.100 Pagina 10 di 31
LEDS:
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED
Normal Mode
Boot Mode
1: Device State (green)
Blinks slowly (~1Hz)
ON:
Device powered
OFF:
Device not powered
2: KNX communication
(yellow)
Blinks when KNX frame is received
Blinks quickly:
Boot state
Blinks very slowly (~0.5Hz):
update in progress
3: BACnet communication
(yellow)
Blinks when BACnet frame (RS232/RS485/Ethernet) is
received
Blinks quickly:
Boot state
Blinks very slowly (~0.5Hz):
update in progress
4: Error state (yellow)
ON:
At least one BACnet request hasn’t a correct
response
OFF:
No errors are present
Blinks quickly:
Boot state
Blinks very slowly (~0.5Hz):
update in progress
5: Ethernet Link (green)
ON:
Ethernet cable connected
OFF:
Ethernet cable disconnected
ON:
Ethernet cable connected
OFF:
Ethernet cable disconnected
6: KNX Programmation (red)
ON:
KNX Programmation activated
OFF:
KNX Programmation not activated
Blinks quickly:
Boot state
Blinks very slowly (~0.5Hz):
update in progress