Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
BACnet Master / KNX
Document code: MN67801_ENG Revision 1.100 Pagina 24 di 31
Figure 5b: “BACnet Set Access
BACnet Write” window
The means of the fields in the window (Write) are the follows:
If the field “
Enable
” is checked, the BACnet request is enabled;
In the field “
IP Address
” insert the IP address of the slave where the data are written (ID for the BACnet MS/TP);
In the field “
Object Type
” select the object to be written;
In the field “
Data Type
” the type of data to write is defined;
In the field “
Instance
”, define the instance number of the object;
In the field “
Property
” select the property to be written;
In the field “
Priority
” the priority of the BACnet request is defined;
In the field “
NByte
”, define the number of bytes sent in the request;
By checking the field “
En Dest
” it is possible to enable the Destination Network (D Net), Destination Length (D Len) and Destination
Address (D Adr). These informations are used for make a request to other segments of network (through a BACnet router);
In the field “
D Net
” the destination network (from 1 to 65535) is defined;
In the field “
D Len
” the length of “D Add” field (1 or 2 or 6) is defined;
