Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
M-Bus / M-Bus Wireless / MQTT
Document code: MN67931_ENG Revision 1.200 Page 25 of 49
Figure 3j: “Set Communication
TLS” window
Figure 3k: “Set Communication
NTP” window
TLS
(T
RANSPORT
L
AYER
S
ECURITY
):
This section is used to define the parameters of TLS protocol. The means of the
fields are:
If the field “
Enable TLS
” is checked, the TLS protocol for secure connection
is enabled;
If the field “
Server Authentication
” is checked, the authentication of the
Server using TLS is enabled. If enabled, in the field “
Server Certificate
” the
certificate from the Server is defined;
If the field “
Client Authentication
” is checked, the authentication of the
Client using TLS is enabled. If enabled:
o
in the field “
Client Certificate
” the certificate from the Client is
defined;
o
in the field “Client Key” the private key of the Client is defined;
o
in the field “Client Key Password” the password for the private key of the Client is defined.
NTP
(N
ETWORK
T
IME
P
ROTOCOL
):
This section is used to define the parameters of NTP protocol. The means of the
fields are:
In the field “
Server URL
” the URL or the IP Address of the NTP Server is
defined;
In the field “
Poll Time (seconds)
” the polling time for the time
synchronization is defined.
