Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
M-Bus / M-Bus Wireless / MQTT
Document code: MN67931_ENG Revision 1.200 Page 27 of 49
Figure 3k: “Set MQTT Topics” window
MQTT SET TOPIC:
By Pressing the “
MQTT Set Topic
” button from the main window for SW67931 (Fig. 2) the window “Set MQTT Topics” appears (Fig. 4).
This section is used to define the MQTT topics where the converter will publish the data from M-Bus.
The means of the fields are:
In the field “
Topic
” the MQTT topic is defined;
If the field “
Retained
” is defined, the retained flag is enabled. The MQTT server will hold the last topic published;
In the field “
QoS
” the QoS level is defined;
In the field “
Template
” the payload of the MQTT message is defined. It is possible to link the data into the message using the
specific keywords listed;
In the field “
Mnemonic
” a description of the topic is defined.
