Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
M-Bus / M-Bus Wireless / MQTT
Document code: MN67931_ENG Revision 1.200 Page 30 of 49
S
ECTION
V
ARIABLES
(B
Y
T
YPE
):
Selecting the desired node it is possible to add a variable. In
order to create a new variable it is necessary to fill these items:
To use the created variable the field “
Enable Variable
”
must be checked. If you have created a variable but for
the moment it is unused it is possible to uncheck the field
“Enable Variable” without delete it;
In the field “
Description
” it is possible to write a
description of the variable (it isn’t a necessary
information, it helps the readability of the tree of
network);
The field “
Type of Data
” is used to select the unit of
measure;
In the field “
VIF ASCII String
” insert the string of VIF. It
is possible to use this field only if the “Type of Data” is
“VIF is in ASCII”;
In the field “
Function Field
” it is necessary to select the
type of data;
The field “
Dimension
” is used to select the dimension of
the variable (8, 16, 24, 32, 32 real, 48, 64 bit, Variable
Length);
In the field “
Length(Variable Len)
” insert the length of
the data in the case of the dimension is “Variable
Length”;
In the field “
Unit
” if it is necessary it is possible to select the unit of that variable. The Unit is used for indicates from which device
the data come;
In the field “
Storage Number
” if it is necessary it is possible to insert the value of storage counter of that variable. With this field
the slave can indicate and transmit various stored counter states or historical values, in the order in which they occur;
In the field “
Tariff
” if it is necessary it is possible to insert the value of the tariff of that variable. The Tariff is used for indicates from
which device the data come;
In the field “
VIFE
” it is possible to select a sub-type of “Type of Data”;
If the field “
From BCD to Integer
” is checked the Converter converts the BCD value of variable in Integer format. This happens only
if the variable is in BCD format; if it isn’t nothing changes.
