Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
SNMP Agent / LoRaWAN Gateway
Document code: MN67F41_ENG Revision 1.000 Page 20 of 33
Figure 3f: “Set Communication
Wi-Fi (Access
Point)” window
W
I
-F
I
:
This section is used to define the general parameters of Wi-Fi. It is possible to
defined the type of Wi-Fi communication:
Access Point;
Station.
The means of the fields for Access Point configuration are:
In the field “
IP Address
” the IP address of the converter is defined;
In the field “
Subnet Mask
” the SubNet Mask of the converter is defined;
In the field “
GATEWAY
” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “
SSID
” the name of the Wi-Fi network to create is defined;
In the field “
Secure
Type
” the type of security protocol used by the Wi-Fi
network is defined;
In the field “
Password
” the password used for Wi-Fi connection is defined;
If the field “
Enable DHCP
” is checked, the converter acts as DHCP Server for the Clients connected. If the option is enabled, in the
fields “
DHCP First IP Address
” and “
DHCP SUBNET Mask
” the IP Addresses range used for DHCP is defined. In the field “
Lease
Time (seconds)
” the required time for the renewing of the IP Address assigned to the Client is defined;
In the field “
Max Client
” the maximum number of Wi-Fi Clients accepted is defined;
In the field “
Channel
” the channel for Wi-Fi communication is defined.
