Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
PROFINET Master / Serial
Document code: MN67B70_ENG Revision 1.000 Page 19 of 31
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, PROFINET and
Serial.
By Pressing the “
Set Communication
” button from the main window for SW67B70 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “PROFINET Master” are:
In the fields “
IP Address
” the IP address for PROFINET side of the converter is
defined;
In the fields “
SubNet
Mask
” the SubNet Mask for PROFINET side of the converter is
defined;
In the fields “
Gateway
” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of
the net;
In the field "
Name of Station
" the name of the PROFINET node is defined.
The means of the fields for “Serial” are:
In the field “
Serial
” the serial line to use is defined;
In the field “
Baudrate
” the baudrate for the serial line is defined;
In the field “
Parity
” the parity of the serial line is defined;
In the field “
Stop Bits
” the number of Stop Bits is defined.
Figure 3: “Set Communication” window
