14
2-2-2
WAN Settings
WAN (Wide Area Network) Settings is applied to connect to your ISP.
IP Configuration (Setting WAN Port)
There are four methods to obtain a WAN port IP address:
1.
DHCP Dynamic IP
2.
Static IP Fixed IP
3.
PPPoE (dial-up ADSL)
4.
PPTP
IP Address obtained by DHCP and PPPoE may change. If you are not familiar with creating a
network connection, please contact your local ISP.
After selecting the suitable option, click Accept at the bottom of the screen to save the settings.
You need to save the changes and restart the Radio Gateway to activate the changes.
Enter System Settings
→
Save/ Restart page then Save and Restart. Wait for about 40 seconds
before the Radio Gateway obtains an IP address by the method you selected.
Note: After the new IP address is obtained, the Web Configuration Screen can be entered by
entering new IP address at the address bar if you’re connecting through WAN Port. The same
principle applies to the next two settings.
General Settings
→
WAN
General Settings
→
WAN Settings