27
2-2-6
Hot Line
General Settings
→
Hot Line
Enable: Tick the check box to enable a line. If some lines are not used, disable them (Pause
Function) to avoid unnecessary waiting when an incoming call is diverting to the line.
Hot Line: Check to direct the call automatically to a pre-configured destination without any
action when the FXS is off-hook. (i.e. as the user picks up the phone). When the FXS is under Hot
Line mode, no other phone numbers can be dialed.
Hot Line No.: Enter hot line no. for automatic dialing. If there are more numbers than columns,
you can use Speed Dial function of Digit Map.
Warm Line: Enter the time for the call to start with a pause, so the user can dial another number.
The call will be automatically directed to the pre-configured destination within timeout period.
FXS Group: When there is an incoming call and the ATA will automatically assign an unassigned
call according to the Hunting Priority. If Port 2 does not want to be set as an assigned line to
receive any inbound calls, the function can be disabled.
