30
plan is according to the Digit Map; otherwise the FXS will send the number which digit count is
the same as VoIP Centrex Extension Digit Count.
Metering Pulse Type/ Metering Pulse Period: It is used for telephony device which connected
to FXS port for billing purpose. FXS provide Polarity Reversal
、
12k Hz and 16k Hz metering
capacity. The fully support for detail Metering Pulse Period is not free charge, please contact
with your vendor.
General Settings
→
Line settings (VoIP Only)
FXS Impedance: Select different impedance from the drop-down menu.
General Settings
→
Line settings (VoIP Only)
This feature is a call drop standard for a FXS to determine whether or not to hang up the phone.
The RoIP will disconnect the call automatically to avoid keeping the line engaged if the detected
volume is below the Silence Detection Threshold or the time exceeds the Drop Silent Call
Timeout.
Silence Detection Threshold: When the detected audio is lower than the set-up threshold, the
connection will be hung up automatically.
Drop Silent Call Timeout: The system will hang up automatically when the detected audio is
lower then threshold and longer than timeout duration to avoid occupied lines.
Note: Improper values for above settings might cause unexpected automatic disconnection of a
call. Default values are recommended.
General Settings
→
Line settings (VoIP Only)
Enable IVR Option: Check the box to enable IVR function. Once disabled, it’s unavailable to use
**password# to acquire or modify settings. (It is suggested not to use IVR and Radio together to
avoid anomaly.)
