GB
GB
PROGRAMMED MAINTENANCE
INTERVENTION
DAILY
ORDINARY/MONTHLY
RECOVERY TANK CLEANING
•
SUCTION FILTER CLEANING
•
BRUSH CLEANING
•
BRUSH REMOVAL
•
SQUEEGEE ASSEMBLY CLEANING
•
FRONT SQUEEGEE RUBBER REPLACEMENT
•
as required
REAR SQUEEGEE RUBBER REPLACEMENT
•
as required
SQUEEGEE HOSE CLEANING
•
SOLUTION TANK CLEANING
•
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristle diameter are the elements that distinguish different types of brushes.
MATERIAL
CHARACTERISTICS
PPL (Polypropylene)
Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
BRISTLES THICKNESS
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
On irregular floors with deep joints or relieves, softer bristles penetrate more easily and deeper. Please be aware that when brush
bristles are worn out they become rigid and unable to penetrate and clean deeper. This may also cause brush vibration with thicker
bristles.
PAD HOLDER
Pads are recommended to clean smooth surfaces. The pad holder has anchor points to retain the pad. It is important that the
height of the pad holder with its pad is the same as the one of the brush.
CODE
QUANTITY
DESCRIPTION
USE
48903020
1
Brush PPL 0,6 Ø 345
Normal floors.
48903030
1
Brush PPL 0,9 Ø 345
Smooth floors with small joints and persistent dirt.
48903050
1
Brush 5-mix Ø 345
For all types of floors.
48803010
1
Pad holder Ø 330
For pads of 14”, for smooth surfaces cleaning.
48803030
1
Pad holder Ø 330 + center lock green
For pads of 14”, for smooth surfaces cleaning.
48803040
1
Pad holder Ø 330 + center lock black
For pads of 14”, for smooth surfaces cleaning.
21
Summary of Contents for Baby-e
Page 2: ......
