background image

7

ADICOS GSME-X20

408-2410-004 EN22

sAfety instructions

2.3  Personnel Qualification

Any work on ADICOS systems may only be performed by qualified personnel. Per

-

sons, who can perform work on electrical systems and recognize possible dan

-

gers based on their professional education, knowledge, and experience as well as 

knowledge of the applicable provisions, are considered qualified personnel.

WARNING!

Personal injury and property damage!

 

Improperly performed work on and with the device can lead to malfuctions.

• 

Installation, startup, parameterization and maintenance may be performed 

only by authorized and properly trained personnel.

2.4 

Handling Electrical Voltage

DANGER!

Risk of explosion by electrical voltage in potentially explosive atmospheres!

The electronics of ADICOS GSME-X20 detectors requires an electrical voltage 

that can trigger an explosion in potentially explosive atmospheres.

•  Do not open enclosure!
• 

De-energize the entire detector system and secure against unintentionally 

reactivation for all wiring work!

2.5 

Modifications

WARNING!

Property damage or detector failure by any form of unauthorized 

modification!

Any form of unauthorized modification or extension can lead to a failure of the 

detector system. The warranty claim expires.

• 

Never make unauthorized modifications on your own authority. 

2.6 

Accessories and Spare Parts

WARNING!

Property damage due to short circuit or failure of the detector system

The use of parts other than the manufacturer's original spare parts and original 

accessories may result in property damage due to short circuits.

• 

Only use original spare parts and original accessories!

• 

Original spare parts and accessories may only be installed by trained spe

-

cialist personnel.

• 

Qualified personnel are persons as described in Chap. 2.3

Summary of Contents for GSME-X20

















Reviews: