Appendix C — Specifications
37
Pod connectors:
Combine power, I
2
C and single-ended or
differential analog input signals on one
connector, support pods, particular
transducers, etc.
Supply voltage:
±
5 V regulated
Maximum current:
50 mA per pod port
Communications:
2-wire I
2
C
Signal input:
Positive and negative analog inputs
Connector type:
8-pin DIN.
Sampling
ADC resolution:
16 bits (150
µ
V resolution at 10 V range)
Linearity error:
±
2 LSB (from 0
°
C to 70
°
C)
Maximum sampling rates:
100 kHz on one channel;
40 kHz on two channels;
20 kHz on three or four channels.
Available sampling rates:
100 kHz down to 0.003 Hz using Chart
100 kHz down to 2 Hz using Scope
100 kHz to 1 Hz using Chart for Windows
Output Amplifier
Output configuration:
Single-ended or differential (complementary)
Output resolution:
16 bits (150
µ
V resolution at 10 V range)
Maximum output current:
±
15 mA typical
Output impedance:
0.1
Ω
typical
Slew rate:
6 V/
µ
s
Settling time:
2
µ
s (to 0.01% of FSR for LSB change)
Linearity error:
±
1 LSB (from 0
°
C to 70
°
C)
Output ranges:
±
200 mV to
±
10 V full scale in six steps
±
10 V
±
5 V
±
2 V
±
1 V
±
500 mV
±
200 mV
Summary of Contents for PowerLab 2/20
Page 4: ...iv PowerLab Owner s Guide ...
Page 40: ...32 PowerLab Owner s Guide ...
