19
Adirondack Spas
®
OWNER'S MANUAL
iniTiAl opErATing inSTrucTionS
Start-up and refill procedures
Your Adirondack Spas® model has been tested at the manufacturing plant to ensure that all
of the spa functions operate . During the test procedure, a small amount of water may have
remained in the spa plumbing . Through the shipping process water may have spotted the spa
shell . You may need to wipe down the shell with a soft cloth . Please read and follow the start-up
instructions to ensure a successful start-up or refill .
•
Inspect and clean spa shell of any debris
• Do not turn power on to spa unless filled with water to appropriate level (See Page
20-21). The spa pack must never be operated without water in the spa; serious
damage to the heater and/or pump(s) may result.
• Do not fill spa with water before checking the items below (below items may become
loose in transit):
•
Do not fill spa with hot water . This may cause a false error code to the temperature sensor .
A
A
C
C
A.
Hand tighten unions at the pumps
B.
Tighten drain valve
note:
The Drain Valve is left open for
shipping and must be closed before filling spa.
C.
Tighten unions on heater
B
!
!
C
C
(LE)
(SE)
