User Manual MIC 980
Issue 21.01.2019_01
22
7.1 Optional displays
7.1.1
Favourites
Optional displays/ Favourites
Click on a program symbol or a program
name and the program is pre-selected and
will then be started. (see item 0).
7.1.2
Nominal step values
Optional displays / Nominal step values
Overview of the entered nominal values
for the program step. The entered nominal
values
3
are only shown in readiness mode
they can however not be changed
(exception: manual program)
1
Configuration setting in the basic configuration: Light always on during „Pre-heating “
(Code 1008). When you
switch on the light manually „M“ , it will stay on until it is manually switched off.
2
Configuration setting in the basic configuration
(Code 5052, Alarm 1. Setting can be changed)
3
Nominal values can be changed in programming mode or in operating mode (transient nominal value change)
Shortcut buttons/ readiness mode
1. Change air circulation level.
2. Steam flap (item 1.4)
3. Turntable
– is switched on
4.
Starting a baking progam
(see item 0)
5. Menu Light remains switched on
1
6. Extractor (exhaust fan) (item 1.4)
7. Terminate readiness mode. Back to
standby (see item 2)
Information bar
System status bar
When the nominal temperature has been
reached, an additional status message
„Temperature reached“ will be shown
. The
horn will be switched on for 5 seconds
2
.
1
2
3
4
5
6
7
8