User Manual MKA 500 / MKA 800
Conforms to
Issue 21.02.2023_01 Page 51
8. The effects of heat:
Keep the appliance away from heat sources, like radiators, heating conduits,
ovens, and other elements that may radiate heat.
9. Energy sources:
The appliance should only be connected to the power sources that are specified
in the user manual or on the appliance housing itself.
10. Cleaning:
Clean the display and the operator interface only with a damp, soft and clean cloth
without any chemical and mechanical substances. Do not use sharp-edged tools or pointed objects or
other mechanical aids.
11. Appliance not in use:
When you know the appliance is not going to be used for a longer period of
time, it should be disconnected from the mains.
12. Contaminants:
You have to be extremely careful that neither liquids nor foreign objects can get
into the appliance through the openings in the housing. If objects or liquids have contaminated the
inside of the appliance, it has to be disconnected immediately and sent in to the manufacturer.
13. Servicing after damage:
The appliance may only be serviced by a qualified specialist. The user
should only do the servicing tasks he is meant to do according to the user manual. For servicing that
exceeds his authority, a specialist should always be contacted.
Hint
Never make any technical alterations to the appliances,
unless they were
specifically approved by aditec gmbh.
Unauthorized alterations will invalidate your
warranty.
For enquiries, orders and repair enquiries, please contact us at the following address:
Measurement and
Control technology
Hardware development
Software development
Specialised electronics
Food technology
Process visualisation
aditec gmbh
Talweg 17
D-74254 Offenau
Tel.:+49(0)7136 96122-0
Fax:+49(0)7136 96122-20
www.aditec.net
eMail: info@aditec.net