User Manual MKA 500 / MKA 800
Conforms to
Issue 21.02.2023_01 Page 12
3.1 Entering values (Edit box)
MKA 500:
Values/numbers are entered by
using the arrow buttons.
Figure 4:
Value entry
MKA 800:
Enter numbers via the navigation
pad
How to enter values:
▪
Cursor
is flashing in the position ‚far right’: „00“.
▪
When you are making an entry, the cursor i
s at first in the position ‚far right: „00“. Use the
button (MKA500) /
(MKA800) to increase the value and button (MKA500) /
(MKA800)
to reduce the value.
The numbers will automatically shift to the left „10“. The number value you enter is
limited by the limit value range.
▪
When
you press the arrow button ‚left’, you can change the individual digits.
Entering negative values
MKA 500
MKA 800
Certain nominal values can be negative numbers
(e.g. temperature
values)
. In order to enter a negative value you have to press the
arrow button „down“ until you go past value 0, when a minus („ - „)
sign will appear in front of the numbers
Entering positive values:
MKA 500
MKA 800
When you want to change a negative number into a positive one, you
can position the cursor on the „-“ sign and overwrite it with a „+“ via
the arrow button „up“ or you can enter a value higher than „0
Hint
Scrolling characters:
MKA 500
MKA 800
Use the arrow buttons „up“ / „down“ (keep pressed) to
scroll a character.
3.2 General text entry (Edit box)
How to enter text:
▪
Cursor is flashing in the first position: „_“.
▪
When you are making an entry the cursor is
at first in the position „_ “. Use the
button
(MKA500) /
(MKA800) to scroll up the characters (number/letter/ special character), or
the
(MKA500) /
(MKA800)
button to scroll
them down. Us the arrow buttons ‚left’
or ‚right‘ to change the individual digits. In this way you can take the cursor to any position
in the entry box.
Characters can only be entered in the position that is flashing. Press the relevant button „up“
or „down“ until the required character appears. The first character is a blank.
