ADJ 3 SIXTY 2R, User Instructions

ADJ Products, LLC  -  www.adj.com  - 3 Sixty 2R Instruction Manual Page 28

  3 Sixty 2R   

                     System Menu

ADJ Products, LLC  -  www.adj.com  - 3 Sixty 2R Instruction Manual Page 29

  3 Sixty 2R   

                     System Menu

1. Press the MODE/ESC button to access the main menu. Press the 

UP or DOWN buttons so that “Personality” is highlighted, then press 

ENTER. 
2. Press the UP or DOWN buttons until “Status Settings” is dis-

played, press ENTER.
3. Press  UP or DOWN buttons, until “Tilt_L Reverse” is displayed, 

and press ENTER. 
4. Either “Off” or “On” will be displayed, use the UP and DOWN but-

tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to 

exit.

Tilt_R Reverse - With this function you can reverse the right head Tilt 

movement. This function is used with DMX mode.

1. Press the MODE/ESC button to access the main menu. Press the 

UP or DOWN buttons so that “Personality” is highlighted, then press 

ENTER. 
2. Press the UP or DOWN buttons until “Status Settings” is dis-

played, press ENTER.
3. Press  UP or DOWN buttons, until “Tilt_R Reverse” is displayed, 

and press ENTER. 
4. Either “Off” or “On” will be displayed, use the UP and DOWN but-

tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to 

exit.

Pan Degree - With this function you can change the pan degree from 

630 to 540. This function is used with DMX mode.

1. Press the MODE/ESC button to access the main menu. Press the 

UP or DOWN buttons so that “Personality” is highlighted, then press 

ENTER. 
2. Press the UP or DOWN buttons until “Status Settings” is dis-

played, press ENTER.

3. Press  UP or DOWN buttons, until “Pan Degree” is displayed, and 

press ENTER. 
4. Either “540” or “630” will be displayed, use the UP and DOWN 

buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to 

exit.

Feedback - With this function you can feedback switch the pan 

movement or tilt movement.

1. Press the MODE/ESC button to access the main menu. Press the 

UP or DOWN buttons so that “Personality” is highlighted, then press 

ENTER. 
2. Press the UP or DOWN buttons until “Status Settings” is dis-

played, press ENTER.
3. Press  UP or DOWN buttons, until “Feedback” is displayed, and 

press ENTER. 
4. Either “Off” or “On” will be displayed, use the UP and DOWN but-

tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to 

exit.

Movement Speed - With this function you can set the pan and tilt 

movement speed.

1. Press the MODE/ESC button to access the main menu. Press the 

UP or DOWN buttons so that “Personality” is highlighted, then press 

ENTER. 
2. Press the UP or DOWN buttons until “Status Settings” is dis-

played, press ENTER.
3. Press  UP or DOWN buttons, until “Movement Speed” is dis-

played, and press ENTER. 
4. Either “Speed 1”, “Speed 2”, “Speed 3” or “Speed 4” will be dis-

played, use the UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to