13
A C C E S S O R Y I N S TA L L AT I O N
BARREL
To install the barrel, remove the thumbscrew located at the top of the fixture’s lens frame, then insert
the back end of the barrel (the side closest to the gobo holder) into the lens frame, making sure that
the hole on the barrel is aligned with the thumbscrew hole on the lens frame (Fig. 1). Then insert and
tighten the thumbscrew to secure the barrel in place (Fig. 2). Please note that the barrel requires
its own separate safety cable when installed in a suspended setting.
1
2
GEL FRAME
To install the gel frame, press the release on the retainer clip at the end of the barrel, and flip the clip
open (Fig. 1). Slide the gel frame into the slot at the end of the barrel (Fig. 2), then close the retainer
slip to secure it in place.
1
2
Summary of Contents for ENC176
Page 1: ...User Manual ENCORE PROFILE MINI WW ...
Page 34: ......
