ADJ ENC176 User Manual Download

Page: 4 / 34

Unpacking: Thank you for purchasing the Encore Profile Mini WW by ADJ Products, LLC. Every unit

has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-

aged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate

the unit have arrived intact. In the event that damage has been found or parts are missing, please con-

tact our toll free customer support number for further instructions. Do not return this unit to your dealer

without first contacting customer support.

Introduction: The ADJ Encore Profile Mini WW is a DMX intelligent, feature-packaged ellipsoidal. To

optimize the performance of this product, please read these operating instructions carefully to familiar-

ize yourself with the basic operations of this unit. These instructions contain important safety informa-

tion regarding the use and maintenance of this unit. Please keep this manual with the unit for future

reference.

Customer Support: Contact ADJ Service for any product related service and support needs. Also visit

forums.adj.com

with questions, comments or suggestions.

Parts: To purchase parts online visit:

http://parts.adj.com

(US)

http://www.adjparts.eu

(EU)

ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST

Voice: 800-322-6337 | Fax: 323-582-2941 | support@adj.com
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET

Voice: +31 45 546 85 60 | Fax: +31 45 546 85 96 | support@adj.eu

ADJ PRODUCTS LLC USA

6122 S. Eastern Ave. Los Angeles, CA. 90040

323-582-2650 | Fax 323-532-2941 |

www.adj.com

info@adj.com

ADJ SUPPLY Europe B.V

Junostraat 2 6468 EW Kerkrade, The Netherlands

+31 (0)45 546 85 00 | Fax +31 45 546 85 99

www.americandj.eu

info@americandj.eu

ADJ PRODUCTS GROUP Mexico

AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000

+52 (728) 282-7070

CAUTION! To reduce risk of shock or fire, do not expose this unit to rain or moisture! This unit is

intended only for use in dry, indoor applications.

CAUTION! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself,

as doing so will void your manufacturer’s warranty. In the unlikely event your unit may require service,

please contact ADJ Products, LLC.
Do not discard the shipping cartoon in the trash. Please recycle when ever possible.

I N T R O D U C T I O N

Summary of Contents for ENC176



































Search results

Summary of Contents for ENC176

Reviews:

Related manuals for ENC176

Brands by name

Popular brands

ADJ ENC176, User Manual

Search results

Summary of Contents for ENC176

Reviews:

Related manuals for ENC176

Brands by name

Popular brands