ADJ Products, LLC - www.adj.com - MOD HEX100 User Manual Page 22
RGBWA + UV Dimmer Mode:
1. Plug the fixture in and press the MODE button until “MANUAL” is displayed. Press the SET UP
button to cycle through the RGBWA+UV colors.
2. When “RED” is displayed, the unit is in Red dimming mode. Use the UP and DOWN buttons to
adjust intensity.
3. When “GREN” is displayed, the unit is in Green dimming mode. Use the UP and DOWN buttons
to adjust intensity.
4. When “BLUE” is displayed, the unit is in Blue dimming mode. Use the UP and DOWN buttons to
adjust intensity.
5. When “WHIT” is displayed, the unit is in White dimming mode. Use the UP and DOWN buttons to
adjust intensity.
6. When “AMBE” is displayed, the unit is in Amber dimming mode. Use the UP and DOWN buttons
to adjust intensity.
7. When “UV” is displayed, the unit is in UV dimming mode. Use the UP and DOWN buttons to
adjust intensity.
8. After the colors have been adjusted to make the desired output color, strobing can be acitvated
by pressing the SET UP button.
9. “STROB” will be displayed, this is strobing mode. The strobing can be adjusted between “00”
(strobing off) to “15” (fastest strobing).
Color Change Mode:
1. Plug the fixture in and press the MODE button until “JUMP RUN SNAP: XX” is displayed. “XX”
represents a number between 01-16.
2. Use the UP and DOWN buttons to find your desired color change mode.
3. Press the SET UP button and “SPEED: XX” will be displayed. Use the UP and DOWN buttons to
adjust the speed of the color change.
The speed can be adjusted between “01” (slowest) to
“16” (fastest).
Color Fade Mode:
1. Plug the fixture in and press the MODE button until “FADE RUN SNAP: XX” is displayed. “XX”
represents a number between 01-16.
2. Use the UP and DOWN buttons to find your desired color fade mode.
3. Press the SET UP button and “SPEED: XX” will be displayed. Use the UP and DOWN buttons to
adjust the speed of the color fade. The speed can be adjusted between “01” (slowest) to
“16” (fastest).
Auto Run Mode:
1. Plug the fixture in and press the MODE button until “AUTO RUN FAD+SNAP” is displayed.
2. Press the SET UP button and “SPEED: XX” will be displayed. Use the UP and DOWN buttons to
adjust the speed of the Auto Run. The speed can be adjusted between “01” (slowest) to
“16” (fastest).
MOD HEX100
Operating Instructions
